Raymarine E-Series - Page 54

• Name
• Position (as Lat/Lon and range/bearing from vessel)
• Temperature (requires appropriate sensor, only for waypoints
captured at the vessel position)
• Depth (requires appropriate sensor, only for waypoints captured
at the vessel position)
• Date and time
• Comment — You can add your own text comments to a waypoint.
• Symbol — A default symbol is assigned, or you can select an
alternative.
There are 2 features which allow you to view or edit waypoint
information:
• Place the cursor over a waypoint hotspot on the 2D chart or Radar
screen to view selected information.
• Use the waypoint list for comprehensive information to view and
edit as required.
Displaying the waypoint list
1. Press the WPTS/MOB button.
2. Press the REVIEW AND EDIT WAYPOINTS softkey.
Waypoint editing
Editing waypoint details
With the Waypoint List displayed:
1. Select the VIEW AND EDIT DETAILS softkey.
The Edit Waypoint dialog is displayed.
2. Select the eld you want to change.
3. Select the EDIT... softkey to display the on-screen keyboard.
4. Use the on-screen keyboard to make the changes, then select
the on-screen keyboard’s SAVE key.
Editing a waypoint on the chart or radar screen
In the chart or radar application:
1. Place the cursor over the waypoint.
The softkeys change to show the waypoint options.
2. Select the VIEW AND EDIT DETAILS softkey.
The Edit Waypoint dialog is displayed.
3. Select the eld you want to edit.
4. Use the EDIT... softkey to display the on-screen keyboard.
5. Use the on-screen keyboard to make the changes, and then
select the on-screen keyboard’s SAVE key.
Waypoint symbols
There are a range of symbols to represent different waypoint types.
Symbol Type Symbol Type
Airport Anchor
Billsh
Bottom mark
Bridge Buoy
Cans Car
Caution Circle
Concrete
Diamond
Diamond quarter Diver down
Diver down
(alternative)
Dolphin
Dot Dotted square
54 E-Series Widescreen User reference