Menu item Description Options
Record Vessel Track By Determines how track points are recorded on the chart:
• Auto — track points are automatically created.
• Time — track points are created based on time.
• Distance — track points are created based on distance.
• Auto (default)
• Time
• Distance
Track Interval
Determines the interval that will be used for track point creation. The
options available depend on the option selected for the Record Vessel
Track By menu item, as follows:
• Auto — if the Auto option is selected for the Record Vessel Track
By menu item, no options are available for the Track Interval menu
item.
• Time — if the Time option is selected for the Record Vessel Track
By menu item, you can use the Track Interval menu item to specify
the time interval.
• Distance — if the Distance option is selected for the Record
Vessel Track By menu item, you can use the Track Interval menu
item to specify the distance interval. The units used for this setting
depend on the setting made for Distance Units in the MENU >
System Setup > Units Setup menu.
If TIME is selected for the Record Vessel Track
By menu item:
• 2 secs
• 5 secs
• 10 secs
• 30 secs
• 1 min
• 3 min
• 5 min
• 10 min
• 30 min
If DISTANCE is selected for the Record Vessel
Track By menu item:
• 0.02 nm / sm / km
• 0.05 nm / sm / km
• 0.1 nm / sm / km
• 0.2 nm / sm / km
• 0.5 nm / sm / km
Using the chart
97
To Next Page
Loading...
