OPERATION
50
pressing SHIFT + EXPAND. If Detail Zoom is on, then the signal list will be generated from the spectrum
shown in the spectral thumbnail.
Frequency Allocation Information
When generating a signal list, the OSCOR will automatically populate the comments field with
information about the frequency band that a signal might be a part of for the currently selected ITU
region. This information contains known regulatory or other uses of given frequency bands. Depending
on the frequency there may be multiple allocations given.
The frequency allocation information is also provided anytime that a signal is added to an existing signal
list.
Note: The frequency allocation information is provided as reference from the International
Telecommunication Union (ITU) database per their band assignments. It should not be used to
determine if a signal is or is not a threat. It is the user's responsibility to investigate and analyze to
determine whether it is friendly or a threat.
Setting the ITU Region
To ensure that accuracy for the frequency allocation information, be sure to set the ITU region.
1. From the Main Menu, select Signals or press F3.
2. From the Signals Sub-Menu, select Options or press F3.
3. From the Options Sub-Menu, select a value from the ITU Region drop-down box.
a. ITU Region 1 comprises Europe, Africa, the former Soviet Union, Mongolia, and the
Middle East (west of the Persian Gulf).
b. ITU Region 2 covers the Americas, Greenland and some of the eastern Pacific Islands.
To Next Page
Loading...
Need help?
General
