10A-53
ENGINE AND CYLINDER BLOCK ASSEMBLY
Oil filter: Removal - Refitting
F4R
10A
a Top up the engine oil with oil recommended by the
manufacturer (see Vehicle: Parts and ingredients
for the repairwork) (04B Consumables - Products).
a Start the engine and wait until the oil pressure war-
ning light goes out on the instrument panel.
a Check for leaks from the oil filter.
a Remove the oil recovery container.
a Refit the engine undertray.
a Wait at least 10 minutes.
a Check the oil level using the dipstick.
a Adjust the engine oil level if necessary.
To Next Page
Loading...
