17B-6
PETROL INJECTION
Oxygen sensors: Removal - Refitting
F4R
17B
-the catalytic converter strut (8) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the downstream oxygen sensor connec-
tor (9) ,
a Remove the downstream oxygen sensor (10) using
the (Mot. 1495-01).
REFITTING THE DOWNSTREAM OXYGEN
SENSOR
I - REFITTING OPERATION FOR PARTS
CONCERNED
a Refit the downstream oxygen sensor on the catalytic
converter.
a Torque tighten the downstream oxygen sensor
(34 N.m) using the (Mot. 1495-01).
a Connect the downstream oxygen sensor connector.
II - FINAL OPERATION
a Refit the catalytic converter strut.
a Fit the electric coolant pump.
a Refit:
-the electric coolant pump clips,
-the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-4) ,
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the battery (see Battery : Removal - Refitting)
(80A, Battery),
- the engine cover.
21926
To Next Page
Loading...
