19B-25
EXHAUST
Catalytic converter: Removal - Refitting
F9Q, and 872
19B
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-a new exhaust flange seal,
-the catalytic converter.
a Fit a new After-Sales sleeve (see 19B, Exhaust, Ex-
haust: Precautions for repair, page 19B-12) .
III - FINAL OPERATION
a Check:
-that there is no contact with the underbody,
-that all the exhaust pipe heat shields are in place.
a Start the vehicle.
a Check that there are no leaks.
a Refit the engine undertray.
IMPORTANT
Position the « nut and bolt securing the sleeve »
assembly so that the assembly cannot come into
contact with the underbody.
To Next Page
Loading...
