19C-11
TANK
Fuel tank: Removal - Refitting
19C
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the filler neck hose at the fuel tank end.
a Fit a component support under the fuel tank.
a Remove:
-the fuel tank bolts (19) ,
-the fuel tank.
If the fuel tank is being replaced
a Remove the fuel level sensor module (see 19C,
Tank, Fuel level sensor module: Removal - Refit-
ting, page 19C-16) .
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Fuel pipe clip
between the fuel tank filler neck and the fuel tank
(11,08,01,05).
If the fuel tank is being replaced
a Refit the fuel level sensor module (see 19C, Tank,
Fuel level sensor module: Removal - Refitting,
page 19C-16) .
136423
136415