19C-15
TANK
Filler neck: Removal - Refitting
19C
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the earth bolts (2) from the filler neck.
a Disconnect the anti-return pipe .
a Remove the clip (3) from the « filler neck - fuel tank »
connecting hose on the fuel tank side.
a Disconnect the filler neck hose from the fuel tank.
a Remove the filler neck.
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Fuel pipe clip
between the fuel tank filler neck and the fuel tank
(11,08,01,05).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the filler neck.
a Connect the filler neck hose to the fuel tank.
a Refit a new clip on the « filler neck - fuel tank » con-
necting hose.
a Disconnect the anti-return pipe.
a Refit the earth bolts on the filler neck.
a Torque tighten the filler neck earth bolts (21 N.m).
III - FINAL OPERATION
a Refit:
- the rear right-hand wheel arch liner (see Rear
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the rear right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the filler neck bolts on the fuel tank flap.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
136440
136434