Research Instruments INTEGRA 3 - Intended Use; Introduction to the Integra 3

CONTENTS
 
 
Intended Use 2
Applicable Part Numbers 3
Microscope Compability 3
Installaon 3
 
Guidance & Manufacturer’s Declaraon
- Electromagnec Emissions (IEC 60601-1-2) 5
- Electromagnec Immunity 6
Safety/Informaon Symbols 8
 
System Components 10
Integra 3 System Component Part Numbers 11
Integra 3 System Microscope Adaptor Part Numbers 12
Hardware Overview 13
Rear Panel 14
Packaging and Handling Requirements 14
Integra 3 Specicaon Table 15
 
Petri Dish Posioning 17
Petri Dish Choice 17
Heated Stage Plate 18
Heated Metal Inserts 18
Heated Glass Inserts 18
Fing Micropipees 20
Inserng MPH into Toolholder 21
Inial Pipee Set-up Diagram 21
Inial Pipee Set-up Instrucons 21
Pipee Angle Adjustment 25
Roune Pipee Set-up 25
Shut Down Procedure 26