Research Instruments INTEGRA 3 - Component Identification

Introducon to the Integra 3™

Research Instruments Ltd
2
Secon 2


Zeiss Axiovert 40/100/200, Axio Observer, Axio Vert.A1
Nikon TMD, Diaphot 200/300, TE200/300, TE2000, Ti
Leica DMIRB, DMI3000B/4000B/6000B, DMIL, DMi8
Olympus IMT2, IX50/70, IX51/71/81, IX53/73/83

Installaon of the Integra 3 system should be carried out by a Research
Instruments technician or other RI authorised personnel. Incorrect
installaon could result in poor pipee set-up and an overall poor
performance.
Relocaon of this system should be treated as a re-installaon and
should, therefore, be carried out by authorised personnel.
Please note that installaon and servicing is covered separately in the
Integra 3 Installaon and Service Manual (6-54-701IM). Users within the
USA will not be provided with Integra 3 Installaon and Service Manual.
The only user-serviceable parts are those detailed in the Troubleshoong
and Care and Maintenance Secons.
Ensure that the mains power supply adaptor is prevented from
falling o the bench as this is likely to cause damage to equipment.
 
6-54-110 Integra 3 with Heated Metal Insert
6-54-100 Integra 3with Heated Metal Insert and Thermosafe
6-54-150 Integra 3 Upgrade with Thermosafe
6-54-160 Integra 3 Upgrade without Thermosafe