Research Instruments INTEGRA 3 - Routine User Maintenance

Secon 11
Integra 3™ Care and Maintenance

Research Instruments Ltd
11

Regular servicing by an RI authorised technician will help to ensure
that your system performs at its best. We recommend a minimum of
one annual inspecon and service. However, this may need to be
more frequent if systems are heavily used. Contact your distributor or
RI’s service team directly (see page 71) to arrange servicing. Where
necessary, RI will provide all technical informaon required to assist in
resolving problems.
The following roune maintenance operaons can be carried out by
users, but can also be carried out by RI authorised technicians if desired.
For all other maintenance requirements, contact your distributor or RI’s
service team directly.
Part numbers of replacement parts detailed in this secon are as follows:

Lever sness screws can be adjusted as required (see Figure 10-1 on
page 50 & Figure 10-2 on page 50).
 
5-34-004 SAS/MPH O-ring Set
5-34-005 SAS/MPH O-ring Set with Tools
5-43-880 Thermosafe Filters, 4 Pack