Secon 11
Integra 3™ Care and Maintenance
Research Instruments Ltd
11
Use a dust cover to protect the Integra 3 when not in use. This will
minimise the need for cleaning. We recommend and supply a non-PVC
dust cover as plascisers commonly used in exible PVC are known to be
embryotoxic.
Always remove any spilt liquid or dirt immediately, ie keep instruments
clean.
The Integra 3 can be cleaned with a so lint-free cloth moistened with
isopropyl alcohol only. This should be done with the instrument switched
o at the wall switch and the instrument should be completely dry before
switching on. Never use water to clean the Integra 3.
If liquid is spilt inadvertently, at the
wall switch. Only then, quickly dry the instrument using paper towels
or similar. If it is suspected that liquids have gone inside the instrument
then contact RI for advice before switching on.
Always replace a blown fuse with a correctly rated new fuse.
If any electronic component is no longer serviceable, it must be
sent back to RI to be destroyed in an environmentally safe way.
Do not dispose of with ‘normal’ waste.
Dispose of the pipee and its packaging in a suitable container.
To Next Page
Loading...