Research Instruments INTEGRA 3 - Controls and Functions Overview

Secon 6
Integra 3™ Electronic Control System

Research Instruments Ltd
6
Please refer to the User Interface Icons table on the previous page for
images of the icons discussed below. The icons are idenable in the
following text by their  typeface.

The stopwatch can be accessed from the main screen by pressing the
icon. Once in the stopwatch screen the mer can be started
and stopped by pressing the and  icons respecvely, and can be
used between 0 and 59 minutes 59 seconds. Aer this me it connues
ming from 0 seconds. The icon can be used to zero the me. Press
the icon to return to the main screen.

The counter can be accessed from the main screen by pressing the
icon or the +1 buon on the le hand side of the Integra 3. The
counter can be used to count incrementally either upwards or downwards
between 0 and 99. To count upwards, press either the +1 buon or press
the icon on the touch screen. To count downwards, press the
 icon on the touch screen. To reset the counter, press the 
icon on the touch screen. Press the icon to return to the main screen.

In order to improve visibility underneath the Integra 3, the device is ed
with white LED lights. These are acvated by movement beneath the
Integra 3. The length of me the lights remain on aer detecng moon
can be adjusted as follows.
Press the icon and then the icon. The me
period can be adjusted between 0 and 9 seconds by pressing the 
and icons before pressing to exit. When set to 0 seconds
the lights will remain o. Press the icon to return to the main screen.