12
Intera 3.2
Getting to Know Baxter
Getting to Know Baxter
Setting Up Baxter
To prepare for the arrival and setup of Baxter, read the
Baxter Pre-Delivery Guide
. The document
arrives in an email prior to the delivery of your order.
To set up Baxter:
• Locate the installation card that ships with the robot. Follow the instructions to
assemble the pedestal (if ordered), and attach Baxter to the pedestal or alternate
work surface.
• Follow the instructions included with the gripper kit to install a gripper.
If you misplace these documents, refer to our wiki:
mfg.rethinkrobotics.com/wiki/Support_Resources
Accessories
Included accessories:
• Power cord
• E-stop button and 10-foot cable
Optional accessories:
• Rethink Robotics Electric Parallel Gripper Kit
• Rethink Robotics Vacuum Cup Gripper Kit
• Baxter pedestal
To Next Page
Loading...
