168
Intera 3.2
Appendix E: Transfer Tasks from
One Baxter to Another
You can copy tasks from one robot and transfer them to another using a USB memory stick. Details
of the task are included in the transfer. You only need to update the device referenced. This capabil-
ity is useful when a factory is using multiple Baxters to perform the same task.
When transferring tasks to a different robot, variability across robots and fiducials are not taken into
account.
Note: If you have multiple exports of tasks on the same USB stick, only the most recent set of
exported tasks will be imported.
How to Export Tasks from a Robot
1. Insert a USB device, formatted as FAT32, into the USB port on Baxter.
2. On Baxter, go to
3. Main Screen > Settings > Advanced > Export/Import Tasks.
4. Scroll to Export.
To Next Page
Loading...