REXROTH IndraDrive C Series User Manual

Rexroth IndraDrive C Disposal and Environmental Protection 8-1
DOK-INDRV*-HCS02.1****-PR02-EN-P
8 Disposal and Environmental Protection
8.1 Disposal
Products
Our products can be returned to us free of charge for disposal. It is a
precondition, however, that the products are free of oil, grease or other
dirt.
In addition, when returned the products mustn't contain any undue foreign
matter or foreign component.
Please send the products free domicile to the following address:
Bosch Rexroth AG
Electric Drives and Controls
Bürgermeister-Dr.-Nebel-Straße 2
D-97816 Lohr am Main
Packaging Materials
The packaging materials consist of cardboard, wood and polystyrene.
They can be easily recycled. For ecological reasons you should not return
the empty packages to us.
8.2 Environmental Protection
No Release of Hazardous Substances
Our products do not contain any hazardous substances that they can
release in the case of appropriate use. Normally there aren't any negative
effects on the environment to be expected.
Materials Contained in the Products
Electronic Devices
Electronic devices mainly contain:
• steel
• aluminum
• copper
• synthetic materials
• electronic components and modules
Motors
Motors mainly contain:
• steel
• aluminum
• copper
• brass
• magnetic materials
• electronic components and modules

REXROTH IndraDrive C Series Specifications

General

Protection Class	IP20
Communication Interfaces	EtherCAT, PROFIBUS, PROFINET, CANopen
Feedback Systems	Incremental Encoders, Absolute Encoders, Resolver
Ambient Temperature	0°C to 45°C
Cooling Method	Natural convection or forced air
Relative Humidity	5% to 85% (non-condensing)
Control Modes	Torque, position