5. Connecting the Device via Wireless Connection (150BW models only)
98
• The device name cannot be changed when the Settings screen is displayed from
the Connecting screen.
Set the name of this machine to be displayed on the device
when connecting from the device side.
• The device name can be set using four to 30 single-byte
alphanumeric characters.
• The name cannot be changed when it is displayed from the
Connecting screen.
• When using this machine for the first time, set this item on
the initial setting screen. For details, see page 22 "Changing
the Initial Settings".
Select the display language for the wireless connection screen.
• When using this machine for the first time, set this item on
the initial setting screen. For details, see page 22 "Changing
the Initial Settings".
• The display language for the On-screen Display menu is set
in the On-screen Display menu.
Displays the MAC address of this machine.
Advanced wireless connection setting
2 dev. simul.
connection by OS
func.
Select whether or not to connect this machine to two devices at
the same time when you directly connect this machine to a
device using the OS function.
Selecting "Do not allow" may enable wireless connections
between this machine and the device, which prohibits
connections other than to a specific access point.
• Allow
You can directly connect this machine to two devices using
the OS functions.
• Do not allow
When directly connecting this machine to a device using the
OS function, you can connect only one device.
To Next Page
Loading...
