*1 When the initial settings have already been made, there is no need to change the
settings anew.
The machine can connect to a maximum of two devices wirelessly and can display
screens from them at a time. You can use a combination of the following methods to do
this:
• Using the relevant OS function
• Using RICOH Monitor Mirroring for macOS/iOS
• Using RICOH Monitor Multicast for Windows
• Using RICOH Monitor Auto Cast for Windows
• Wi-Fi setup is required when used in combination with an application to connect to
devices in the same network.
Using the Application to Connect to Devices in the Same Network
Use RICOH Monitor Mirroring for macOS or RICOH Monitor Mirroring for iOS to connect to
devices in the same network as this machine via an access point.
For details about supported operating systems, see Supported OS, a separately provided
manual.
• This machine and the device must be connected to the same network (same
subnet).
Settings of this machine required for connection
To Next Page
Loading...
