Ricoh 150 - When Using this Machine for the First Time; Attaching Cable Clamps

2. Preparations for Using the Machine
18
2
When Using this Machine for the First
Time
When using this machine for the first time, perform the following operations:
Attaching Cable Clamps
1. Remove the stickers from the supplied cable clamps ( 4).
2. Attach the cable clamps to the desired position on the back of this machine.
• Example of cable clamps installation
Proceed to page 19 "Connecting Cable".
• It is recommended that the cable clamps be installed evenly on both sides of the
back of this machine in order to keep the cables in the following condition when this
machine is stored in the sleeve case: