• To automatically connect to a network saved on this machine when it is detected,
select the "Auto-connect to saved networks" check box.
Connecting with RICOH Monitor Mirroring for macOS
Download RICOH Monitor Mirroring for macOS
• Applying the latest security patches to the OS of the device can reduce security
risks. Make sure that the OS of the device on which the application is to be
installed has the latest security patches and update them, as necessary.
Search for "RICOH Monitor Mirroring" in the Mac App Store, and then download the
application.
Connecting
When this machine is turned ON, it enters the standby state for connection, and the
connecting operation is performed from the device side. Once the connection is accepted
by this machine, a wireless connection will be established. Even if Switching Input is set
to USB ports, wireless connection can be established when the connecting operation is
performed from the device side.
1. Turn ON this machine and confirm that the Waiting to Connect screen is
displayed.
For details about how to turn ON the machine, see page 29 "Turning On and Off the
Power".
If the Waiting to Connect screen does not appear after turning ON the machine, set
the Switching Input to [Wireless Connection]. For details, see page 31 "Switching
Inputs".
2. Start RICOH Monitor Mirroring for macOS.
When RICOH Monitor Mirroring for macOS starts, the search for RICOH Monitors in
the same network starts, and a list of such is displayed.
To Next Page
Loading...
