Ricoh 150 - When You Cannot Use the Machine as You Want; Problems Related to Power Supply

When You Cannot Use the Machine As You Want
127
8
When You Cannot Use the Machine As You
Want
This section explains what to do when the machine cannot be operated as you want.
• Check the model name of this machine to be used and check the description of the
corresponding model name. For details about how to check the model name, see
page 3 "About the Model Names of this Machine".
• The machine might not operate normally, depending on the connected computer,
smartphone, USB PD charger, or cable. For information about the models tested and
verified for normal operation, visit our website.
Problems Related to Power Supply
150 model
Problem
Possible cause
Solutions
Power is not turned
ON.
-
If this machine is connected to a
device that supports the USB PD
standard or to a USB PD charger
and this machine is turned OFF,
this machine does not turn ON
automatically even if a new
device is connected to it. Press
the power button.
The USB PD charger is
malfunctioning.
Replace the USB PD charger.
Insufficient power is being
supplied to this machine
from the USB PD charger
being used.
Replace with a USB PD charger
with an output of 7.5 W or higher.
There is no function to
supply power from the
connected device to this
machine.
Connect this machine to a USB
PD charger.
The USB Type-C cable is not
properly connected.
Reconnect the USB Type-C
cable.