Ricoh 150 - Network Environment; Supported os for Wireless Connection

5. Connecting the Device via Wireless Connection (150BW models only)
46
5
Settings of this machine required for connection
Settings
Reference
Dev.Info/Settin
g
*1
page 97 "Dev.Info/Setting"
Wi-Fi
page 22 "When Using the Wireless Connection for the First Time
(150BW models only)"
page 100 "Wi-Fi"
*1 When the initial settings have already been made, there is no need to change the
settings anew.
The machine can connect to a maximum of two devices wirelessly and can display
screens from them at a time. You can use a combination of the following methods to do
this:
• Using the relevant OS function
• Using RICOH Monitor Mirroring for macOS/iOS
• Using RICOH Monitor Multicast for Windows
• Using RICOH Monitor Auto Cast for Windows
• The IP address of this machine is automatically assigned by DHCP.
Network Environment
For wireless connection via an application, your network must meet the following
requirements:
Item
Network Environment
Standard
IEEE802.11 b/g/n
(2.4GHz)
IEEE802.11 a/n/ac
(5GHz)
Encryption
method
WPA2-PSK
*1
*1 The communication encryption method follows Miracast and supports WPA2-PSK.
Supported OS for Wireless Connection
For details about operating systems that support wireless connection, see Supported OS,
a separately provided manual.