Ricoh 150 - Using the Application to Connect to Multiple RICOH Monitors at the same Time

Overview of Wireless Connection
45
5
Settings
Reference
Wi-Fi
page 22 "When Using the Wireless Connection for the First Time
(150BW models only)"
page 100 "Wi-Fi"
*1 When the initial settings have already been made, there is no need to change the
settings anew.
The machine can connect to a maximum of two devices wirelessly and can display
screens from them at a time. You can use a combination of the following methods to do
this:
• Using the relevant OS function
• Using RICOH Monitor Mirroring for macOS/iOS
• Using RICOH Monitor Multicast for Windows
• Using RICOH Monitor Auto Cast for Windows
• The IP address of this machine is automatically assigned by DHCP.
Using the Application to Connect to Multiple RICOH Monitors at the
Same Time
Use RICOH Monitor Multicast for Windows to connect multiple RICOH Monitors and
devices in the same network.
For details about supported operating systems, see Supported OS, a separately provided
manual.
• All connected RICOH Monitors and devices must be connected to the same
network (same subnet).
Up to 32 RICOH Monitors can be connected simultaneously, enabling Windows screen
sharing and touch operation from a specific connected RICOH Monitor.