Changing the Volume
1. Slide the Menu/Select/Enter button up or down when the On-screen Display
menu or Switching Input screen is not displayed.
• Increase the volume
Slide the Menu/Select/Enter button up.
• Decrease the volume
Slide the Menu/Select/Enter button down.
• Changing the volume of the machine from the factory default settings can increase
the power consumption of the machine. When the relevant setting is displayed for
the first time, a message appears. If you agree with the message after confirming its
content, press the center of the Menu/Select/Enter button. If the message has
already been displayed when using Brightness, Contrast, or Color Temp. on the On-
screen Display menu, the message is not displayed when changing the volume.
• When the message Low power mode appears, this machine is connected to a power
source with an output of less than 15 W, which limits the setting values of the
setting items. To change the setting values, connect this machine to a device that
supports the USB PD standard with an output of 15 W or more or to a USB PD
charger. For details about the contents of the message, see page 117 "If a Message
is Displayed during Operation".
To Next Page
Loading...
