Ricoh 150 - Page 145

When You Cannot Use the Machine As You Want
143
8
Problem
Possible cause
Solutions
The screen flickers.
This is due to the
specifications of this
machine and is not a defect
or malfunction.
The screen could appear to
flicker depending on the
operating environment and user.
Changing the brightness setting
in the On-screen Display menu
could improve the flickering.
page 114 "Setting Items in the
On-screen Display Menu"
Screen glows
momentarily when
brightness is
changed
This is due to the
specifications of this
machine and is not a defect
or malfunction.
-
Part of the screen
remains unlit.
OLED panels form an image
via a collection of pixels and
are manufactured to design
specifications. While most of
the screen operates
normally, there are some
dots in red, blue, or green
that remain unlit, pixel by
pixel. This is a limitation of
OLED technology and is not a
defect or failure.
-
150BW model
Problem
Possible cause
Solutions
No image is
displayed (when
wired connection is
used).
This machine is turned OFF.
Turn ON the power of this
machine.
page 29 "Turning On and Off
the Power"
The USB Type-C cable is not
properly connected.
Reconnect the USB Type-C
cable.
A problem with USB Type-C
cable.
Replace the USB Type-C cable.