3. Touch [Wi-Fi] ( ).
The Wi-Fi screen appears.
4. Select the network that you want to connect to from the list displayed in "Select
network".
To specify the SSID directly, touch the entry field of "Network", and then enter the
SSID using the soft keyboard.
5. Touch the entry field of "Password", and then enter the password using the soft
keyboard.
6. Touch [OK].
7. If the connection is successful, touch [Back].
To continue to start the connection, proceed to page 69 "Connecting with RICOH Monitor
Multicast for Windows".
• Once the connection is successfully established, the network settings are saved in
this machine. If you do not want to save the settings, delete the settings from the
[List of Saved Networks]. For details, see page 97 "Changing Wireless Connection
Settings".
• Up to eight network settings can be saved. If eight network settings have already
been saved and a new network is to be saved, the oldest network setting will be
deleted.
To Next Page
Loading...
