Ricoh B264 - Page 117

SCANNER ACCESSIBILITY OPTION (B815)
SM 1-87 B264/B265
Installation
Connect the Scanner
1. Attach one ferrite core [A] to the cable 40 mm away from the scanner unit.
2. Attach one ferrite core [B] near the cable connector.
3. Connect the cable [C] to the scanner.
4. Attach the safety blocks [D] behind each hinge ( x 2 ea.).
NOTE: These blocks prevent the ARDF from falling over if it is opened too far.
40mm
B815I118.WMF
[A]
[B]
[C]
[D]
[D]