Ricoh B264 - Exit Sensor; Stamp Solenoid; Controller Board

EXIT SENSOR
SM 9 B714
Auto Reverse
Document
Feeder B714
1.12 EXIT SENSOR
Open the ARDF.
[A]: Pull the platen sheet off halfway.
[B]: Open the exit guide plate.
[C]: Exit guide plate cover ( x 2)
[D]: Exit sensor ( x 1,  x 1)
1.13 STAMP SOLENOID
Rear cover ( 0)
Open exit guide plate ( 1.12)
[A]: Exit guide plate cover ( x 1)
[B]: Stamp solenoid ( x 1,  x 1)
1.14 CONTROLLER BOARD
Rear cover ( 0)
[A]: Controller board ( x 4, all )
B597R116.WMF
B597R201.WMF
B597R202.WMF
[A]
[B]
[C]
[D]
[A]
[A]
[B]