Ricoh B264 - Iob

PRINTED CIRCUIT BOARDS
SM 3-87 B264/B265
Replacement
Adjustment
3.19.3 IOB
1. Remove the rear lower cover [A] ( x 4).
2. Remove the IOB [B] ( All,  x 4, Ribbon cable x 1).
3. The IOB is identical for the B264/B265. However, the DIP switches are set
differently for each machine. Check the DIP switches then adjust settings as
required. (See next page.)
B195R821.WMF
B195R822.WMF
[B]
[A]