Ricoh B264 - ID Sensor

PHOTOCONDUCTOR UNIT (PCU)
SM 3-37 B264/B265
Replacement
Adjustment
3.11.7 ID SENSOR
Remove:
• Remove the PCU (3.11.1)
• Fusing unit ( 3.15)
• Development unit ( 3.12.1)
1. Remove the PCU rail [A] ( x2,  x1)
2. Remove the ID sensor bracket [B] ( x1,  x1)
3. Remove the ID sensor [C] ( x1)
4. Do SP3-001-2 to initialize the ID sensor.
B195R941.WMF
[B]
[C]
[A]