PAPER SHIFT MECHANISM
SM 5 B546
Booklet
Finisher
B546
2.3 PAPER SHIFT MECHANISM
In sort and stack mode, only the 1st sheet of copy paper from the 2nd set is shifted
to the front to separate each set of copies.
When the copy paper comes into the staple tray [A], the upper exit guide [B] (which
contains the upper exit roller) opens. The paper switches back to the stopper [C].
Then the front guide release solenoid [D] turns on and the front guide [E] is
released, the shift motor moves jogger fence [F] to the front, and the copy paper
shifts to the front by 30 mm.
After copy paper has been shifted, the upper exit guide closes and the lower exit
roller [G] turns in the opposite direction to feed out the copy paper.
B546D569.PCX
B546D570.PC
To Next Page
Loading...
