SERVICE PROGRAM MODE
SM 31 B779
Fax Option
B779
3. SERVICE TABLES
CAUTION
Never turn off the main power switch when the power LED is lit or flashing.
To avoid damaging the hard disk or memory, press the operation power
switch to switch the power off, wait for the power LED to go off, and then
switch the main power switch off.
NOTE: The main power LED ( ) lights or flashes while the platen cover or
ARDF is open, while the main machine is communicating with a facsimile
or the network server, or while the machine is accessing the hard disk or
memory for reading or writing data.
3.1 SERVICE PROGRAM MODE
SP1-XXX (Bit Switches) Section 3.2 Bit Switches
1
Mode No. Function
System Switch 101
001 – 032 00 – 1F
Change the bit switches for system settings
for the fax option
Section 3.2 Bit Switches
Ifax Switch 102
001 – 016 00 – 0F
Change the bit switches for internet fax
settings for the fax option
Section 3.2 Bit Switches
Printer Switch 103
001 – 016 00 – 0F
Change the bit switches for printer settings
for the fax option
Section 3.2 Bit Switches
Communication Switch 104
001 – 032 00 – 1F
Change the bit switches for communication
settings for the fax option
Section 3.2 Bit Switches
G3-1 Switch 105
001 – 016 00 – 0F
Change the bit switches for the protocol
settings of the standard G3 board
Section 3.2 Bit Switches
G3-2 Switch 106
001 – 016 00 – 0F
Change the bit switches for the protocol
settings of the optional G3 board
Section 3.2 Bit Switches
G3-3 Switch 107
001 – 016 00 – 0F
Change the bit switches for the protocol
settings of the optional G3 board
Section 3.2 Bit Switches
G4 Internal Switch 108
001 – 032 00 – 1F Not used (Do not change the bit switches)
To Next Page
Loading...
