INSTALLING CONTROLLER OPTIONS
B783 12 SM
1.4.4 IEEE 1394 INTERFACE KIT (B581)
Accessories
Check the accessories and their quantities against the following list:
Description Q'ty
1. IEEE 1394 Interface Board B581......................................... 1
CAUTION
TURN OFF THE MAIN POWER SWITCH AND DISCONNECT THE POWER SUPPLY CORD.
NOTE: You can only install one of these network interface boards: IEEE 802.11b
(Wireless LAN), IEEE1284 (Parallel/Centronics), IEEE1394 (FireWire), or
Bluetooth.
1. Remove the cover [A] of board Slot 1 or 2 ( x1).
2. Install the interface board [B] ( x1 knob screw).
NOTE: Use a screwdriver to tighten the knob-screw. Do not tighten manually,
because this can disconnect the board.
3. Reattach the application cover ( x1).
B783I905.WMF
[A]
[B]
To Next Page
Loading...
