Ricoh B264 - Scanner Service Table

SCANNER SERVICE TABLE
B783 22 SM
2.2 SCANNER SERVICE TABLE
SP Number/Name Function/[Setting]
1004 Compression Type
Selects the compression type for binary
picture processing.
[1-3/1/1]
1: MH, 2: MR, 3: MMR
1005 Erase Margin
Creates an erase margin for all edges of the
scanned image.
If the machine has scanned the edge of the
original, create a margin.
[0 – 5/0/1mm]
1009 Forbid Using TWAIN
Sets the system not to use the network
TWAIN scanner driver.
0: Not forbidden (can use TWAIN)
1: Forbid using TWAIN driver.
SP Number/Name Function/[Setting]
Compression level (grayscale) 2021
These SP codes set the compression ratio for the grayscale processing mode that can
be selected with the notch settings on the operation panel.
Range: 5 (lowest ratio) ÅÆ 95 (highest ratio)
1 Level 3 (Middle I-Qual) [5~95/40/1/step]
2 Level 2 (High I-Qual)
[5
~95/50/1/step]
3 Level 4 (Low I-Qual)
[5
~95/30/1/step]
4 Level 1 (Highest I-Qual)
[5
~95/60/1/step]
5 Level 5 (Lowest I-Qual)
[5
~95/20/1/step]
Compression Notch Assignment
5
3
1
2
4
B783S901.WMF