Ricoh B264 - Inverter;Original Set Sensors; Pick-Up Motor;Original Stopper Hp Sensor;Pick-Up Hp Sensor

INVERTER /ORIGINAL SET SENSORS
B714 6 SM
1.8 INVERTER /ORIGINAL SET SENSORS
Rear cover. ( 0)
[A]: Lower the original stopper by rotating
the pick-up motor
Original feed unit ( 1.2)
[B]: Feed guide plate ( x 4, stepped
screw)
NOTE: Raise the original tray before
you re-install the paper feed guide.
Separation roller, torque limiter ( x 1) (
1.7)
[C]: Bracket ( x 1,  x 1)
[D]: Inverter sensor ( x 1)
[E]: Original set sensor ( x 1)
1.9 PICK-UP MOTOR/ORIGINAL STOPPER HP
SENSOR/PICK-UP HP SENSOR
Rear cover ( 0)
[A]: Pick-up motor ( x 1,  x 2, Timing
belt)
[B]: Sensor bracket ( x 2,  x 1)
[C]: Pick-up HP sensor
[D]: Original stopper HP sensor
B597R109.WMF
B597R114.WMF
[A]
[B]
[C]
[D]
[E]
[A]
[B]
[C]
[D]