Ricoh B264 - Internet Mail Communication; Mail Transmission

FAX COMMUNICATION FEATURES
SM 119 B779
Fax Option
B779
4.4.3 INTERNET MAIL COMMUNICATION
Mail Transmission
This machine supports T.37 full mode. (ITU-, RFC232). The difference between
T.37 simple mode and full mode is as follows.
Function T.37 Simple Mode T.37 Full Mode
Resolution 200 x 100
200 x 200
200 x100
200 x 200
200 x 400
400 x 400 (if available)
RX Paper Width A4 A4, B4, A3
RX Data Compression Method MH MH (default), MR, MMR,
Signals
Image data
transmission only
Image data transmission,
exchange of capability
information between the two
terminals, and
acknowledgement of receipt of
fax messages
Data Formats
The scanned data is converted into a TIFF-F formatted file.
The fields of the e-mail and their contents are as follows:
Field Content
From Mail address of the sender
Reply To Destination requested for reply
To Mail address of the destination
Bcc Backup mail address
Subject From CSI or RTI (Fax Message No. xxxx)
Content Type
Multipart/mixed
Attached files: image/tiff
Content Transfer Encoding Base 64, 7-bit, 8-bit, Quoted Printable
Message Body
MIME-converted TIFF-F (MIME standards specify how files
are attached to e-mail messages)
Direct SMTP Transmission
Internet Fax documents can be sent directly to their destinations without going
through the SMTP server. (Internet Faxes normally transmit via the SMTP server.)
For example:
e-mail address:
gts@ricoh.co.jp
SMTP server address:
gts.abcd.com
In this case this feature destination e-mail address (gts@ricoh.co.jp) is read as the
SMTP server address "gts.abcd.com" and the transmissions bypass the SMTP
server.