FAX COMMUNICATION FEATURES
B779 120 SM
Selectable Options
These options are available for selection:
• With the default settings, the scan resolution can be either standard or detail.
Inch-mm conversion before TX depends on IFAX SW01 Bit 7. Detail resolution
will be used if Super Fine resolution is selected, unless Fine resolution is enabled
with IFAX SW01.
• The requirements for originals (document size, scan width, and memory
capacity) are the same as for G3 fax memory tx.
• The default compression is TIFF-F format.
• IFAX SW00: Acceptable paper widths for sending
• IFAX SW09: Maximum number of attempts to the same destination
Secure Internet Transmission
• SMTP Authentication:
User Tools> System Settings> File Transfer> SMTP Authentication
• POP Before SMTP:
User Tools> System Settings> File Transfer> POP Before SMTP
To Next Page
Loading...
