Ricoh B264 - 1-Bin Tray Installation Procedure

1-BIN TRAY UNIT INSTALLATION (B544)
B264/B265 1-26 SM
1.5.2 1-BIN TRAY INSTALLATION PROCEDURE
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Remove Scanner Unit
NOTE: If the ARDF is installed, remove the ARDF before removing the
scanner unit.
• Remove the connector cover [A].
• Disconnect the scanner cable [B].
• Remove the scanner unit [C] ( x 3).
B544I114.WMF
B544I113.WMF
[A]
[B]
[C]