REMOVAL
SM 23 B546
Booklet
Finisher
B546
3.1.9 EXIT UNIT
1. Remove the shift tray unit, and the upper and lower shift guides.
2. Disconnect the connector [A] and remove the screw [B] that secures the
transport belt unit [C].
3. Disconnect [D] ( x4).
4. Hold up the exit unit [E] and remove it with the transport belt unit
( x 3, 1 clamp).
NOTE: When installing the exit unit, make sure to position the exit unit guide
plate (black) [F] over the transport guide plate [G].
B546R113.WMF
B546R114.WMF
[A]
[B]
[C]
[E]
[D]
[F]
[G]
To Next Page
Loading...
