MAIN MACHINE INSTALLATION
SM 1-13 B264/B265
Installation
Toner Bottle
1. Raise the toner bottle holder lever [A], push the lever [B] to the side, and then
pull out the toner bottle holder [C].
2. Unscrew the bottle cap [D] and set the bottle in the holder.
NOTE: Do not touch the inner bottle cap [E].
3. Push the toner bottle holder into the main machine until it locks in place, and
then lower the holder lever [A] to secure the toner bottle.
NOTE: The holder lever cannot be lowered until the toner bottle has been
installed.
4. Attach the toner supply installation
decal [E].
B195I514.WMF
B195I101B.WMF
[B]
[C]
[E]
[D]
[A]
[E]
To Next Page
Loading...
