IMAGE PROCESSING
SM 6-37 B264/B265
Detailed
Descriptions
Pale Mode
Adjust the image for the Pale mode with the one master setting within its allowed
range (for range see Section “5. Service Tables”. To fine adjust the master setting
set it to “0” then perform the adjustments listed below.
SP4904 029 = 0 Pale (General) Quality
SP4903 055 Filter Level: Light Original
SP4903 056 Filter Strength: Light Original
Generation Copy Mode
Adjust the image for the Generation Copy mode with the one master setting within
its allowed range (for range see Section “5. Service Tables”. To fine adjust the
master setting set it to “0” then perform the adjustments listed below.
SP4904 030 = 0 Generation (General) Quality
SP4903 057 Filter Level: Generation Copy
SP4903 058 Filter Strength: Generation Copy
To Next Page
Loading...
