FAX OPTION INSTALLATION PROCEDURE
SM 5 B779
Fax Option
B779
13. Reattach the covers.
14. If the ARDF is installed, raise the ARDF and insert the stamp cartridge [A].
15. Connect the telephone line to the “LINE” jack at the rear of the machine.
NOTE: The copier must be connected to a properly grounded socket outlet.
16. Plug in the machine and turn on the main power switch.
Important
• After you turn the machine on, if you see a message that tells you the
SRAM has been formatted due to a problem with SRAM, turn the machine
off and on again to clear the message.
17. Enter the User Tools mode and set date and time.
18. Do SP3102 and enter the serial number for the fax unit.
NOTE: This is the serial number that you wrote on the plate and attached near
the serial number plate of the mainframe in Steps 1 and 2.
B779I902.WMF
[A]
To Next Page
Loading...
