BIT SWITCHES
B779 56 SM
Printer Switch 03 SP No. 1-103-004
No FUNCTION COMMENTS
0
Length reduction of received
data
0: Disabled
1: Enabled
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits 4
to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
1-3 Not used Do not change the settings
4
to
7
Page separation setting when
sub scan compression is
forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
Page separation threshold (with reduction disabled
with switch 03-0 above).
For example, if this setting is set to "10", and A4 is
the selected paper size:
• If the received document is 10 mm or less longer
than A4, then the 10 mm are cut and only 1 page
prints.
• If the received document is 10 mm longer than
A4, then the document is split into 2 pages.
Printer Switch 04 SP No. 1-103-005
No FUNCTION COMMENTS
0
to
4
Maximum reducible length when length reduction is enabled with switch 03-0 above.
<Maximum reducible length> = <Paper length> + (N x 5mm)
“N” is the decimal value of the binary setting of bits 0 to 4.
Bit 4 3 2 1 0 Setting
0 0 0 0 0 0 mm
0 0 0 0 1 5 mm
0 0 1 0 0 20 mm (default setting)
1 1 1 1 1 155 mm
For A5 sideways and B5 sideways paper
<Maximum reducible length> = <Paper length> + 0.75 x (N x 5mm)
5
6
Length of the duplicated image on the next page, when page separation has taken
place.
usedNot
1
1
mm, 15
1
0
mm, 10
0
1
mm, 4
0
0
=
To Next Page
Loading...
