Ricoh B264 - Page 832

BIT SWITCHES
B779 80 SM
IP Fax Switch 01 SP No. 1-111-002
No. FUNCTION COMMENTS
0-3
IP Fax delay level setting
Selects the acceptable delay level.
Level 0 is the highest quality
Default is "0000" (level 0).
4-7
IP Fax preamble wait time setting Selects the preamble wait time.
[00 to 0f]
There are 16 values in this 4-bit binary switch
combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
IP Fax Switch 02 SP No. 1-111-003
No. FUNCTION COMMENTS
0 IP Fax bit signal reverse setting
0: Maker code setting
1: Internal bit switch setting
When "0" is selected, the bit signal reverse
method is decided by the maker code.
When "1" is selected, the bit signal reverse
method is decided by the internal bit switch.
NOTE: When communicating between IP Fax
devices, LSB first is selected.)
1 IP Fax transmission speed setting
0: Modem speed
1: No limitation
Selects the transmit speed for IP Fax
communication.
2 SIP transport setting
0: TCP
1: UDP
This bit switch sets the transport that has
priority for receiving IP Fax data.
This function is activated only when the
sender has both TCP and UDP.
3-7 Not used Do not change these settings.
Bit 3 Bit 2 Bit 1 Bit 0
0 0 0 0
Level 0
0 0 0 1 Level 1
0 0 1 0 Level 2
0 0 1 1 Level 3