BIT SWITCHES
SM 83 B779
Fax Option
B779
IP Fax Switch 06 SP No. 1-111-007
No. FUNCTION COMMENTS
0-3
Modem bit rate setting for reception
Sets the modem bit rate for reception. The default is "0110" (14.4K bps).
Modem setting for reception
Sets the modem type for reception. The default is "0100" (V27ter, V29, V17).
Bit 3 Bit 1 Bit 1
0 0 1 V27ter
0 1 0 V27ter, V29
0 1 1 Not used
1 0 0 V27ter, V29, V17
4-7
1 0 1
V27ter, V29, V17,
V34
IP Fax Switch 07 SP No. 1-111-008
No. FUNCTION COMMENTS
0 TSI information
0: Not added, 1: Added
Adds or does not add TSI information to
NSS(S).
1
DCN transmission setting at T1
timeout
0: Not transmitted, 1: Transmitted
Transmits or does not transmit DCN at T1
timeout.
2 Not used Do not change this setting.
3
Hang up setting at DIS reception
disabled
0: No hang up
1: Hang up after transmitting DCN
Sets whether the machine disconnects after
DIS reception.
4 Number of times for training
0: 1 time, 1: 2 times
Selects the number of times training is done at
the same bit rate.
5
Space CSI transmission setting at
no CSI registration
0: Not transmitted, 1: Transmitted
When "0" is selected, frame data is enabled.
When "1" is selected, the transmitted data is
all spaces.
6-7 Not used Do not change these settings.
Bit 7 Bit 6 Bit 5 Bit 4
0 0 0 1 V27ter
0 0 1 0
V27ter, V29
0 0 1 1 V27ter, V29, V33 (invalid)
0 1 0 0 V27ter, V29, V17
0 1 0 1 V27ter, V29, V17, V34
To Next Page
Loading...
