Ricoh B264 - Page 838

NCU PARAMETERS
B779 86 SM
Address Function Unit Remarks
680500
Country/Area code for NCU
parameters
Use the Hex value to program the country/area code directly into this address, or
use the decimal value to program it using SP2-103-001
Country/Area Decimal Hex
France 00 00 Hong Kong 20 14
Germany 01 01 South Africa 21 15
UK 02 02 Australia 22 16
Italy 03 03 New Zealand 23 17
Austria 04 04 Singapore 24 18
Belgium 05 05 Malaysia 25 19
Denmark 06 06 China 26 1A
Finland 07 07 Taiwan 27 1B
Ireland 08 08 Korea 28 1C
Norway 09 09 Greece 33 21
Sweden 10 0A Turkey 32 20
Switzerland 11 0B Greece 33 21
Portugal 12 0C Hungary 34 22
Holland 13 0D Czech 35 23
Spain 14 0E Poland 36 24
Israel 15 0F
USA 17 11
Asia 18 12
680501 Line current detection time
680502 Line current wait time
680503 Line current drop detect time
20 ms
Line current detection is
disabled.
Line current is not
detected if 680501
contains FF.
680504
PSTN dial tone frequency upper limit
(high byte)
680505
PSTN dial tone frequency upper limit
(low byte)
Hz (BCD)
If both addresses contain
FF(H), tone detection is
disabled.
680506
PSTN dial tone frequency lower limit
(high byte)
680507
PSTN dial tone frequency lower limit
(low byte)
Hz (BCD)
If both addresses contain
FF(H), tone detection is
disabled.
680508 PSTN dial tone detection time
680509 PSTN dial tone reset time (LOW)
68050A PSTN dial tone reset time (HIGH)
68050B PSTN dial tone continuous tone time
68050C PSTN dial tone permissible drop time
If 680508 contains FF(H),
the machine pauses for
the pause time (address
68050D / 68050E).
Italy: See Note 2.
68050D PSTN wait interval (LOW)
68050E PSTN wait interval (HIGH)
20 ms
68050F PSTN ring-back tone detection time 20 ms
Detection is disabled if
this contains FF.
680510
PSTN ring-back tone off detection
time
20 ms