Ricoh B264 - Page 858

SERVICE RAM ADDRESSES
B779 106 SM
6800E6(H) - User parameter switch 22 (SWUSR_16)
(This switch is not printed on the user parameter list.)
Bit 0: Dial tone detection (PSTN 1) 0: Disabled, 1: Enabled
Bit 1: Dial tone detection (PSTN 2) 0: Disabled, 1: Enabled
Bit 2: Dial tone detection (PSTN 3) 0: Disabled, 1: Enabled
Bits 3 to 7: Not used
6800E7(H) – User parameter switch 23 (SWUSR_17) : Not used
6800E8(H) - User parameter switch 24 (SWUSR_18)
Bits 0 and 1: File retention time (Cross reference: System switch 02 bit 4)
Bit 1 0 Setting
0 0 File retention impossible
0 1 24 hours
1 0 File retention impossible
1 1 72 hours
Bits 2 to 7: Not used
6800E9(H) - User parameter switch 25 (SWUSR_19)
Bit 0 and 1: Not used
Bit 2: Auto switching 0: Fax, 1: Telephone
Bit 3: Not used
Bit 4: RDS operation
0: Not acceptable
1: Acceptable for the limit specified by system switch 03
NOTE: This bit is only effective when RDS operation can be selected by the user
(see system switch 02).
Bits 5 to 7: Not used
6800EA(H) to 6800EF(H) - User parameter switch 26 to 31 (SWUSR_1A to 1F)
: Not used
6800F0(H) - User parameter switch 32 (SWUSR_20)
Bit 0: Quotation priority for a destination when there is no destination of the
specified type
0: Paper output priority
Priority order
1. IP-fax destination, 2. Fax Number, 3. E-mail address, 4. Folder
1: Electric putout order
Priority order
1. E-mail address, 2. Folder, 3. IP-fax destination, 4. Fax number
Bits 1 to 7: Not used
6800F1(H) - User parameter switch 33 (SWUSR_21): Not used
6800F2(H) - User parameter switch 34 (SWUSR_22)
Bit 0: SIP server used with IP-Fax 0: Disabled, 1: Enabled
Bit 1: Gatekeeper server used with IP-Fax 0: Disabled, 1: Enabled
680100 to 68010F(H) - G4 Parameter Switches – Not used
680110 to 68012F(H) - G4 Internal Switches – Not used