Ricoh FT9101 - Page 406

❈7 During duplex paper feeding, transfer time from the
2nd duplex paper feed sensor turns ON to when the reg-
istration sensor turns ON is measured as for like the 1st
to 3rd tray paper feed. The feed motor ON timing for the
2nd time is changed.
2.13.11 Error reset
70 Problem: Jogger fences error. The jogger HP sensor does not come ON within a fixed time.
Cause: Fence overload, jogger HP sensor failure, jogger motor failure, connector contact failure.
71 Problem: Back fence error. Back fence HP sensor does not come ON within a fixed time.
Cause: Back fence overload, back fence HP sensor failure, back fence motor failure, connector
contact failure.
Duplex and Paper Exit
1 July 1994
2-106