Ricoh FT9101 - Total

Item Description Setting Method
(4) OPC segment skip When part of the OPC belt cannot be
used due to scratch, etc. copying is
made skipping the defective part.
Initial setting: All sizes and segments
can be used.
* Copies used for segment tests are not
counted in the total counter.
How to reset the segment skip:
(1) Lower paper for all trays.
(2) Select user tools [4].
(3) Press [#].
(4) Press [CLEAR] and select [Yes].
(5) Press [EXIT].
(1) Press [4] of the menu of user tools.
⇓
(2) Press Enter [#] key.
(The maximum paper size in the paper
tray will be selected.)
(3) Press the Start key.
(Blank copies will be made. Check the
image to be skipped.)
* Number of copies *
DLT, A3 3 copies
B4 4 copies
LT, LG, A4, B5 5 copies
(4) Select the segment to be skipped
among 1st/ 2nd/ 3rd/ 4th/ 5th.
(Skipping all segments is not possible.)
(5) Press Enter [#] key to select another
paper tray.
* Paper size selecting order *
11x17 (DLT), A3 1st segment test
B4 2nd segment test
81/2x14 (LG) 3rd segment test
A4 4th segment test
81/2x11 (LT) 5th segment test
B5 6th segment test
Change the paper to be used and repeat
(3) to (5) above to make the segment
skips for all paper sizes.
(6) Press Exit to finish this mode or the
Clear key to cancel this mode.
When the Clear key is pressed
⇓
Select "Yes/No".
Press "Yes" to clear skip data.
Press "No" to cancel clear.
(5) Set date/time Set and display of data/time for the
weekly timer.
(1) Press [5] of the menu of user tools.
(2) Select year/month/date/day of
week/hour/minute.
(Two or more cannot be selected at the
same time.)
(3) Input the numerical value from the
key pad. Select day of week from the
screen.
(4) Press the Enter [#] key.
Repeat (2) to (4) and set all items.
* Use Clear/Stop key to change the set
number.
* When the Enter key is not input,
previous data are effective.
* If an improper value is set, the value
will automatically be corrected as shown
below.
Size No skip skip #1 Skip #2
DLT, A3 61CPM 41CPM 21CPM
B4 81 61 41
LT, LG,
A4, B5
101 81 61
Item Setting Correction
Month Not 1 to 12 1
Day Not 1 to 31 1
Hour Not 0 to 23 0
Minute Not 0 to 59 0
TABLE OF USER TOOLS 1 July 1994
6-2