BY-PASS TRAY
SM 3-49 G065
Replacement
and
Adjustment
3.15.2 BY-PASS FEED/PICK-UP ROLLER
1. Upper cover (☛ 3.15.1)
2. Lift up paper end feeler [A] to lock feeler in position.
NOTE: Before reinstalling the upper cover, return the paper end feeler to its
original position.
3. Replace the paper feed roller [B] (# x 1)
4. Replace the pick-up roller [C].
NOTE: Do not touch the roller surface with bare hands. After installing the new
rollers, do SP7816 for the bypass tray.
G065R541.WMF
[B]
[A]
[C]
To Next Page
Loading...
